Carving tools - hamlertools
Two small French curves. The carbide drill is used to turn or refresh the burr around the French curve scraper. Place the drill in a Dremell tool backwards so the shaft is showing. With a light dab of fine oil on the carbide shaft and the tool rotating fast you can hold the blade and walk the shaft around the curve to turn a burr, hold the shaft at 5 to 10 degrees off the perpinduclar edge. When forming the burr apply strong pressure to keep the rotating carbide in contact.

Two small French curves. The carbide drill is used to turn or refresh the burr around the French curve scraper. Place the drill in a Dremell tool backwards so the shaft is showing. With a light dab of fine oil on the carbide shaft and the tool rotating fast you can hold the blade and walk the shaft around the curve to turn a burr, hold the shaft at 5 to 10 degrees off the perpinduclar edge. When forming the burr apply strong pressure to keep the rotating carbide in contact.